Siemens 828d Post Processor For Mastercam

Next, John used Mastercam's post processor editor to create a new post processor from scratch. He carefully defined the output settings, such as the G-code dialect, coordinate system, and canned cycles, to match the requirements of the 828D control.

After several days of work, John finally had a working post processor for Mastercam that generated correct G-code for the Siemens 828D control. He tested it on several parts, and the results were excellent. The mill ran smoothly, and the parts were machined accurately. siemens 828d post processor for mastercam

John, a CNC programmer at a job shop, was working on a project that required him to machine complex parts on a Siemens-controlled mill. The shop had recently purchased a new mill with a Siemens 828D control, and John needed to post-process his Mastercam files to generate G-code that the new mill could understand. Next, John used Mastercam's post processor editor to

From that day on, John was known as the "post processor guru" in the shop, and his expertise was sought after by other programmers. He continued to refine and improve the post processor, ensuring that it remained compatible with future updates to Mastercam and the Siemens 828D control. He tested it on several parts, and the

The process was not without its challenges, however. John encountered several issues while testing the new post processor, including incorrect output of G-code for certain machining operations. He had to carefully review the post processor code and make adjustments to get it working correctly.

However, the standard post processor for Mastercam didn't quite work with the 828D control. The shop's older mills used a different control, and the standard post processor was not compatible with the new mill. John tried using the existing post processor, but it resulted in incorrect G-code that caused the mill to malfunction.