These builds are compiled with the newest version of ProxSpace and are always up to date. Here I will post the latest compiled Windows versions from the official Proxmark repository and some forks. If you want me to add a fork please contact me.
Having problems? Please look at the Known issues first.
Warning Proxmark3 Easy users: make sure your Proxmark does have 512KB of flash otherwise these builds might not work!
This tutorial shows how to repurpose a Swissphone PSW900 pager (or a similar POCSAG/ERMES receiver) into an engaging, useful gadget: a networked alert device that displays filtered messages, triggers local actions, and logs events. You'll get a compact, practical project with hardware mods, firmware flow, and creative extension ideas to keep readers engaged.
There are currently builds for two different Proxmark3 repositories. The official Proxmark repository and the RRG / Iceman repository, with the latter having multiple configurations.
This is the most stable firmware for your Proxmark3. It does work on all Proxmark3 devices and is a great starting point, but might lack some features.
The RRG / Iceman repository is bleeding edge with many new features, but it might not be the most stable. It is designed to take advantage of the Proxmark3 RDV4 hardware. This firmware requires 512KB of memory, if your Proxmark3 has less than that and you still want to use it, follow 256kb versions.
Please refer to the Differences section.
Open the Device Manager on your PC and go to the Ports section. You should see COMX, where X is the port number. Make sure this port is your Proxmark3 by unplugging your Proxmark3 from your PC, now the port should be gone. Swissphone Psw900 Idea
There were community efforts to creating a GUI, but no available GUI does support all features of the Proxmark3 client. This tutorial shows how to repurpose a Swissphone
All binaries are created using ProxSpace and the corresponding Proxmark repository. If you don’t trust the binaries and want to compile the Proxmark firmware yourself look at the Proxmark repository for more information. triggers local actions
Many users have no interest in compiling the Proxmark firmware themselves, especially when they only want to use their proxmark3 without modifying the source code.
This tutorial shows how to repurpose a Swissphone PSW900 pager (or a similar POCSAG/ERMES receiver) into an engaging, useful gadget: a networked alert device that displays filtered messages, triggers local actions, and logs events. You'll get a compact, practical project with hardware mods, firmware flow, and creative extension ideas to keep readers engaged.
Please note that It does not work is not a valid error to report.
If you ran into an error during the usage of a precompiled build please contact me with following information:
Please use the forum thread.
The RFID HACKING BY ICEMAN Discord server.
Or contact me through Discord: Gator96100#2719